Power Saver Mode; Exiting The Power Saver Mode - Epson AcuLaser CX17 Series User Manual

The Panel Settings page is printed.

Power Saver Mode

The printer has a power saving feature which reduces power consumption during periods of
inactivity. This feature operates in two modes: Low Power mode and Sleep mode. As delivered, the
printer switches to the Low Power mode five minutes after the last job is finished. The printer then
switches to the Sleep mode after another six minutes of inactivity. When the printer is in the Low
Power mode, the LCD backlight turns off. In the Sleep mode, the
The LCD panel goes blank and displays nothing.
The factory default settings of five minutes (Low Power mode) and six minutes (Sleep mode) are
changeable within the range of 5 to 30 minutes (Low Power mode) and 1 to 6 minutes (Sleep mode).
The printer returns to the ready-to-print state in about 25 seconds when re-activated.
See Also:
"Setting the Time for the Power Saver Mode" on page 298

Exiting the Power Saver Mode

The printer automatically exits the Power Saver mode when it receives a job from a computer. To
manually exit the Low Power mode, press any button on the operator panel. To exit the Sleep mode,
press the (Energy Saver) button.
Note:
When the printer is in the Sleep mode, all buttons on the operator panel except for the
button do not function. To use the buttons on the operator panel, press the
exit the Power Saver mode.
See Also:
"Setting the Time for the Power Saver Mode" on page 298
Epson AcuLaser CX17 Series
(Energy Saver) button lights up.
(Energy Saver)
(Energy Saver) button to
Basic Operation
User's Guide
34