Replacement Of The Tm-T20; Compatibility; Printing; Print Speed - Epson TM-T20IIIL Technical Reference Manual

Replacement of the TM-T20

The TM-T20IIIL is designed so that it can smoothly replace the TM-T20. This chapter describes precautions for
the replacement.

Compatibility

Printing

The printing and character specifications are the same as those of the TM-T20.
Without special configurations, the TM-T20IIIL prints the same results as the TM-T20 prints.

Print Speed

The TM-T20IIIL prints faster than the TM-T20.
Maximum print speed
Print speed setting

Cutting Method

TM-T20IIIL uses the same partial cutting method as the TM-T20 uses, but the point left uncut has been
changed from one point in the left edge to one point at the center.

Logo Registration

The TM-T20IIIL can register logos in the NV memory (NVRAM) with the Setup Utilities.

Driver Compatibility

You can operate the TM-T20IIIL with a driver for the TM-T20.

USB Low Power Consumption Mode

With the TM-T20IIIL, you can enable the USB low power consumption mode using the Epson TM-T20IIIL
Utility.
TM-T20IIIL
Up to 200 mm/s
Level 1 to 13
Depending on print conditions such as print duty, print head temperature, and data transmission
speed, print speed is automatically adjusted.
Chapter 6 Replacement of the TM-T20
TM-T20
Up to 150 mm/s
Level 1 to 13
56