Sending The Scanned File To The Network - Epson AcuLaser CX17 Series User Manual

6
Path
7 Login Name
8 Login Password
9
Confirm Login Password
10 Port Number
After you configured settings, go to "Sending the Scanned File to the Network" on page 204.

Sending the Scanned File to the Network

1. Load the document(s) face up with top edge in first into the ADF or place a single document face
down on the document glass.
See Also:
❏ "Making Copies From the ADF (Epson AcuLaser CX17NF/CX17WF Only)" on page 159
For Computer
To store the scanned document in the share folder directly without creating
any subfolder, leave the space blank.
To store the scanned document in the folder you created under the share
folder, enter the path as following.
Example: Share Folder name: MyShare, Second-level folder name: MyPic,
Third-level folder name: John
You should now see MyShare\MyPic\John in your directory.
In this case, enter the following item.
Path: \MyPic\John
For Server
Enter the path to store the scanned document.
Enter the user account name that has access to the shared folder on your
computer or FTP server.
Enter the password corresponding to the above login name.
Note:
Empty password is not valid in the Scan to Server/Computer feature. Ensure
that you have a valid password for the user login account. (See "Confirming a
Login name and Password" on page 184 for details on how to add a password in
your user login account).
Re-enter your password.
Enter the port number. If you are unsure, you can enter the default value of 139
for SMB and 21 for FTP.
Epson AcuLaser CX17 Series User's Guide
Scanning 204