Resolution - Epson AcuLaser CX17 Series User Manual

Caution:
c
Do not apply excessive force to hold thick document on the document glass. It may break the
glass and cause injuries.
3. Adjust the document resolution, referring to "Resolution" on page 220.
4. Close the document cover.
Note:
❏ Ensure that no document is in the ADF. If any document is detected in the ADF, it takes priority over
the document on the document glass.
❏ If you are faxing a page from a book or magazine, lift the document cover until its hinges are caught
by the stopper and then close the document cover. If the book or magazine is thicker than 20 mm,
start faxing with the document cover open.

Resolution

To specify the resolution level to be used for fax transmission:
1. Press the (Fax) button.
2. Select Resolution, and then press the
3. Select the desired menu item, and then press the
Note:
❏ Values marked by an asterisk (*) are the factory default menu settings.
Standard *
button.
button.
Suitable for documents with normal sized characters.
Faxing (Epson AcuLaser CX17NF/CX17WF Only)
Epson AcuLaser CX17 Series User's Guide
220