Bead-Carry-Out (Bco) - Epson AcuLaser CX17 Series User Manual

Problem
The printed result is foggy.
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.

Bead-Carry-Out (BCO)

Problem
Bead-Carry-Out (BCO) is happening.
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.
Action
When the whole is printed light, contact the Epson local representative office or an
authorised dealer.
When the printed page is partly light, start Clean Developer.
1. Launch the Printer Setting Utility, and click Clean Developer on the Diagnosis
tab.
2. Click the Start button.
Action
If the printer is installed in a high altitude location, set the altitude of the location.
1. Launch the Printer Setting Utility, and click Adjust Altitude on the Printer
Maintenance tab.
2. Select the value close to the altitude of the location where the printer is installed.
3. Click the Apply New Settings button.
Epson AcuLaser CX17 Series
Troubleshooting
User's Guide
324