Storing A Number For Speed Dialing; Sending A Fax Using A Speed Dial - Epson AcuLaser CX17 Series User Manual

When the speed dial job specified in the delayed fax or redial exists, you cannot change the speed dial
number from the operator panel or EpsonNet Config.

Storing a Number for Speed Dialing

1. Press the System button.
2. Select Admin Menu, and then press the
3. Select Phone Book, and then press the
4. Select Speed Dial, and then press the
5. Select the desired speed dial number between 01 and 99, and then press the
6. Select Name, and then press the
7. Enter the name, and then press the
8. Select Phone Number, and then press the
9. Enter the number you want to store using the numeric keypad, and then press the
To insert a pause between numbers, press the Redial/Pause button. "-" appears on the LCD
panel.
10. Select Apply Settings, and then press the
11. Ensure that Are You Sure? is displayed, select Yes, and then press the
12. To store more fax numbers, repeat steps 5 to 11.
13. To return to the previous screen, press the

Sending a Fax Using a Speed Dial

1. Load the document(s) face up with top edge in first into the ADF or place a single document face
down on the document glass and close the document cover.
Epson AcuLaser CX17 Series
button.
button.
button.
button.
button.
button.
button.
(Back) button.
Faxing (Epson AcuLaser CX17NF/CX17WF Only)
User's Guide
button.
button.
button.
235