Auger Mark; Wrinkled/Stained Paper - Epson AcuLaser CX17 Series User Manual

Auger Mark

Problem
The printed result has auger mark.
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.

Wrinkled/Stained Paper

Action
The toner cartridges may be low or need to be replaced. Confirm the amount of
toner in each toner cartridge.
1. Check the toner level in the Consumables tab in the Printer Status window of
the Status Monitor.
2. Replace the toner cartridges as necessary.
Start Clean Developer.
1. Launch the Printer Setting Utility, and click Clean Developer on the Diagnosis
tab.
2. Click the Start button.
Epson AcuLaser CX17 Series
Troubleshooting
User's Guide
325