Epson AcuLaser CX17 Series User Manual page 343

Error Code What You Can Do
024-958 Load the specified paper and press the
See Also:
❏
"Loading Print Media in the Multipurpose Feeder (MPF)" on page 119
❏
"Loading Print Media in the Priority Sheet Inserter (PSI)" on page 127
024-963 Press the
one appears.
See Also:
❏
"Loading Print Media in the Multipurpose Feeder (MPF)" on page 119
❏
"Loading Print Media in the Priority Sheet Inserter (PSI)" on page 127
026-720 Press the
026-721 Press the
disk problem.
026-722
026-723 Press the
026-750 Press the
application you use.
026-751 Press the
026-752
027-446 Change IP address to avoid duplication. Turn off the printer, and turn it on again.
027-452
031-521 Press the
contacting your server administrator.
031-526 Press the
DNS connection, or check if the name of the forwarding destination server is registered with DNS.
031-529 Press the
password for the SMB server is correct.
031-530 Press the
031-533 Press the
❏
If the file name you specified is not used by other users.
❏
If file or folder that has the same name as the one you specified already exists.
❏
If the SMB server encounters any write-protection or disk problem.
button to clear the message and load the specified paper. Follow the on-screen instruction if
button to clear the message. Check if the USB memory device has enough memory.
button to clear the message. Check if the USB memory device is write-protected or gets any
button to clear the message. Check if the path and file name to save the data is too long.
button to clear the message. Check if the interface cable is securely connected, or restart the
button to clear the message. Check if the interface cable is securely connected.
button to clear the message. Check if the access setting to the SMB server is correct by
button to clear the message. Check if the domain name of the SMB server is correct. Check
button to clear the message. Check if the Ethernet cable is properly connected and if the
button to clear the message. Check if the working path setting to the SMB server is correct.
button to clear the message. Check the following:
Epson AcuLaser CX17 Series
button to clear the message.
User's Guide
Troubleshooting 343