Epson AcuLaser CX17 Series User Manual page 318

Problem
The output is too light.
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.
Action
The toner cartridges may be low or need to be replaced. Confirm the amount of
toner in each toner cartridge.
1. Check the toner level in the Consumables tab in the Printer Status window of
the Status Monitor.
2. Replace the toner cartridges as necessary.
Verify that the print media is dry and the correct print media is used.
If not, use the print media recommended for the printer.
See Also:
"Usable Print Media" on page 116
Try changing the Paper Type setting in the print driver.
1. On the Paper/Output tab in Printing Preferences of the print driver, change the
Paper Type setting.
Disable Toner Saving Mode in the print driver.
1. On the Graphics tab in Printing Preferences of the print driver, ensure that the
Toner Saving Mode check box is not selected.
Adjust the transfer bias.
1. Launch the Printer Setting Utility, click Adjust BTR on the Printer Maintenance
tab.
2. Adjust the setting for the type of print media being used.
3. Click the Apply New Settings button.
If you use non-recommended print media, use the print media recommended for
the printer.
Epson AcuLaser CX17 Series
Troubleshooting
User's Guide
318