Epson AcuLaser CX17 Series User Manual page 93

f You can either set the printer to the ad-hoc mode or the infrastructure mode.
❏
For Ad hoc mode:
Select Computer-to-computer (ad hoc) networks only and close the dialog box.
❏
For Infrastructure mode:
Select Access point (Infrastructure) networks only and close the dialog box.
g Click Add to display Wireless network properties.
h Enter the setting that you will send to the printer and click OK.
i Click Move up to move the setting to the top of the list.
j Click OK to close the Wireless Network Connection Properties dialog box.
For Windows Vista:
a Display Control Panel.
b Select Network and Internet.
c Select Network and Sharing Center.
d Select Connect to a network.
e Select the network, and then click Connect.
f Click Close in the dialog box after confirming the connection is a success.
For Windows Server 2008:
a Display Control Panel.
b Select Network and Internet.
c Select Network and Sharing Center.
d Select Connect to a network.
e Select the network, and then click Connect.
Epson AcuLaser CX17 Series
Printer Connection and Software Installation
User's Guide
93