Printing A Panel Settings Page; Power Saver Mode - Epson AcuLaser CX29NF User Manual
High- quality 4- in- 1
Hide thumbs
Also See for AcuLaser CX29NF:
- Setup manual (2 pages) ,
- Specifications (2 pages) ,
- Safety information manual (342 pages)
Table of Contents
Advertisement
5. Specify the current date, and then press the
6. Specify the current time, and then press the
7. Press the
button for Fax Setup.
If you want to skip the Fax Setup, press the Start button to exit the wizard and to restart the
printer.
8. Enter your fax number, and then press the
9. Enter a name, and then press the
10. Press the
button to exit the wizard and to restart the printer.
Printing a Panel Settings Page
The Panel Settings page shows current settings for the operator panel menus.
1. Press the System button.
2. Select Report/List, and then press the
3. Select Panel Settings, and then press the
The Panel Settings page is printed.
Power Saver Mode
The printer has a power saving feature that reduces power consumption during periods of inactivity.
This feature operates in two modes: the Low Power mode and Sleep mode. As delivered, the printer
switches to the Low Power mode three minutes after the last print job is printed. The printer then
switches to the Sleep mode after another six minutes of inactivity. When the printer is in the Low
Power mode, the LCD backlight turns off. In the Sleep mode, Energy Saver button lights up. The
display also goes blank and displays nothing.
The factory default settings of three minutes (Low Power mode) and six minutes (Sleep mode) are
changeable within the range of 3 to 60 minutes (Low Power mode) and 1 to 6 minutes (Sleep mode).
The printer returns to the ready-to-print state in about 30 seconds when re-activated.
Epson AcuLaser CX29 Series
button.
button.
button.
button.
button.
button.
User's Guide
Basic Operation
50
Advertisement
Table of Contents
Troubleshooting
