Receive Buffer; Memory Capacity; Electrical Characteristics; Dip Switches - Epson C31CE94061N Technical Reference Manual

Receive Buffer

You can set the receive buffer of the TM-T88VI to 4KB or 45 bytes with DIP switch 1-2 as with the TM-T88V.
The buffer full condition and buffer full release condition of the TM-T88VI are the same as those of the
TM-T88V.

Memory Capacity

The sizes of the download buffer and NV graphics data of the TM-T88VI are the same as those of the
TM-T88V.

Electrical Characteristics

The operating voltage of the TM-T88VI is DC24 ± 7%, the same as the TM-T88V. The current consumption
differs, depending on the print duty. When you set the print speed to 350 mm/s, the amount of electricity
consumed increases.

DIP Switches

The functional assignments of DIP switches for the TM-T88VI differ from the TM-T88V. See
Switches" on page 53 for more details.

Printer Status

The TM-T88VI goes to the same status under the same conditions as the TM-T88V. You can replace the
TM-T88V with the TM-T88VI without modifying applications.

Logo Registration

The TM-T88VI can register logos in the NV memory (NVRAM) with the Setup Utilities.

Driver Compatibility

You can operate the TM-T88VI with a driver for the TM-T88V.

USB Low Power Consumption Mode

With the TM-T88VI, you can enable the USB low power consumption mode in the software setting mode.
104
"Setting the DIP