Installing Print Driver On Computers Running Mac Os X; Configuring Wireless Settings On The Operator Panel (Epson Aculaser Cx17Wf Only) - Epson AcuLaser CX17 Series User Manual

4. Confirm the printer name, and then click Next.
5. Select whether to use this printer as the default printer.
6. If you want to verify installation, click Print a test page.
7. Click Finish.
When a test page is printed successfully, installation is complete.

Installing Print Driver on Computers Running Mac OS X

Configuring Wireless Settings on the Operator Panel (Epson AcuLaser
CX17WF Only)
You can configure wireless settings on the operator panel.
Important:
❏ The Wireless LAN feature is unavailable depending on the region you purchased.
❏ Be sure to get the SSID and security information from a system administrator in advance when you
use other than WPS to configure wireless settings.
❏ Ensure that the Ethernet cable has been disconnected from the printer before you configure the
wireless settings.
Note:
❏ Before you configure the wireless settings on the operator panel, you need to set up the wireless
network settings on your computer. For details, see the Wireless Network Setup Guide.
❏ For information on the specifications of the wireless LAN feature, see "Configuring Wireless Settings
(Epson AcuLaser CX17WF Only)" on page 57.
You can select a method to configure a wireless setting from the following:
Manual Setup For
Access Point (Infrastructure) Network
Computer-to-computer (Ad-hoc) Network
Printer Connection and Software Installation
Epson AcuLaser CX17 Series User's Guide
103