Connecting The Telephone Line - Epson AcuLaser CX17 Series User Manual

Chapter 8
Faxing (Epson AcuLaser CX17NF/CX17WF Only)

Connecting the Telephone Line

Note:
Do not connect your printer directly to a DSL (digital subscriber line). This may damage the printer. To
use a DSL, you will need to use an appropriate DSL filter. Contact your service provider for the DSL
filter.
1. Plug one end of a telephone line cord to the wall jack connector and the other end to an active wall
jack.
1 Wall jack connector
2 To the wall jack
Note:
Use the telephone line cord which has four contacts. The cord included with your printer has four
contacts. It is recommended that you plug the cord to the wall jack which also has four contacts.
1
Faxing (Epson AcuLaser CX17NF/CX17WF Only)
Epson AcuLaser CX17 Series
2
User's Guide
214