Configuring Wireless Settings (Epson Aculaser Cx17Wf Only) - Epson AcuLaser CX17 Series User Manual

b If you want other users on the network to access this printer, select Share this printer with
other computers on the network, and then enter a share name that users can identify.
c If you want to set a printer as the default for printing, select the Set this printer as default
for printing check box.
d If you want to set a printer as the default for scanning, select the Set this printer as default
for scanning check box.
e If you want to install the fax driver, select the FAX Driver check box.
8. Select the software and documentation you want to install, and then click Install. You can specify
folders in which to install the software and documentation. To change the folders, click
Browse.
9. Click Finish to exit the wizard.

Configuring Wireless Settings (Epson AcuLaser CX17WF Only)

You can configure wireless settings through Easy Install Navi.
Important:
❏ The Wireless LAN feature is unavailable depending on the region you purchased.
❏ Be sure to get the SSID and security information from a system administrator in advance when you
use other than WPS to configure wireless settings.
❏ Ensure that the Ethernet cable has been disconnected from the printer before you configure the
wireless settings.
The specifications of wireless setting function are described below:
Item
Connectivity
Connectivity Standard
Bandwidth
Data Transfer Rate
Specification
Wireless
IEEE 802.11b/g compliant
2.4 GHz
IEEE 802.11b mode: 11, 5.5, 2, 1 Mbps
IEEE 802.11g mode: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Printer Connection and Software Installation
Epson AcuLaser CX17 Series User's Guide
57