Epson AcuLaser CX17 Series User Manual page 65

The "Configuration Complete" screen appears.
18. Wait a few minutes until the printer restarts to establish the wireless network.
Note:
If Found New Hardware Wizard appears, click Cancel.
19. Click Print Printer Setting.
20. Confirm that "Link Quality" is shown as "Good", "Acceptable" or "Low" on the report.
Note:
When "Link Quality" is "No Reception", check if the wireless settings are correctly configured. To
reconfigure the wireless settings, click Next on the "Configuration Complete" screen and then click
Return.
21. Click Next.
22. Follow the on-screen instructions until the "Check Setup" screen appears.
23. Confirm there are no errors displayed on the LCD panel, and then click Start Installation.
Epson AcuLaser CX17 Series
Printer Connection and Software Installation
User's Guide
65