Epson AcuLaser CX17 Series User Manual page 260

Values:
PSTN*
PBX
Dialing Type
Purpose:
To select the dialing type.
Values:
Tone*
DP (10pps)
DP (20pps)
Note:
❏ This menu is not displayed when Region is set to South Africa.
❏ The available values vary depending on the region set for Region.
Interval Timer
Purpose:
To specify the interval between transmission attempts within the range of 3 to 255 seconds. The
default is eight seconds.
Number of Redial
Purpose:
To specify the number of redial attempts to make when the destination fax number is busy, within the
range of 0 to 9. If you enter 0, the printer will not redial. The default is 3.
Redial Delay
Purpose:
To specify the interval between redial attempts within the range of 1 to 15 minutes. The default is one
minute.
Sets the line type to PSTN.
Sets the line type to PBX.
Sets the dialing type to Tone.
Sets the dialing type to Dial Pulse (10 pulse per second).
Sets the dialing type to Dial Pulse (20 pulse per second).
Using the Operator Panel Menus and Keypad
Epson AcuLaser CX17 Series User's Guide
260