Scan Defaults - Epson AcuLaser CX17 Series User Manual

Margin Left/Right
Purpose:
To specify the value of the left and right margins.
Values:
4mm*/0.2 inch*
0-50mm/0.0-2.0 inch
Margin Middle
Purpose:
To specify the value of the middle margin.
Values:
0mm*/0.0 inch*
0-50mm/0.0-2.0 inch

Scan Defaults

Use the Scan Defaults menus to configure a variety of scanner features.
Note:
Values marked by an asterisk (*) are the factory default menu settings.
Scan to Network (Epson AcuLaser CX17NF/CX17WF Only)
Purpose:
To store the scanned image on a network server or on a computer.
Values:
Computer(Network)*
Server(FTP)
Specify the value in increments of 1 mm/0.1 inch.
Specify the value in increments of 1 mm/0.1 inch.
Stores the scanned image on a computer using the Server Message Block (SMB)
protocol.
Stores the scanned image on a server using the FTP protocol.
Using the Operator Panel Menus and Keypad
Epson AcuLaser CX17 Series User's Guide
285