Epson AcuLaser CX17 Series User Manual page 254

Values:
Manual Setup Enter Network
(SSID)
Infrastructure
Specify a name to identify the wireless network. Up to 32 alphanumeric char-
acters can be entered.
Select when you configure the wireless setting through the access point such
as a wireless router.
No Security Specify No Security to configure the wireless setting
without specifying a security method from WEP,
WPA-PSK-TKIP, WPA-PSK-AES and WPA2-PSK-AES.
WEP(64Bit) Specify the WEP 64bit Key to use through the wireless
network. Enter 10 hexadecimal characters.
Transmit Key
WEP(128Bit) Specify the WEP 128bit Key to use through the wireless
network. Enter 26 hexadecimal characters.
Transmit Key
WPA-PSK-TKIP Select to configure the wireless setting with the security
method of WPA-PSK-TKIP.
PassPhrase
Entry
Select to configure the wireless setting with the security
WPA-PSK-AES
method of WPA-PSK-AES.
PassPhrase
Entry
WPA2-PSK-AES Select to configure the wireless setting with the security
method of WPA2-PSK-AES.
PassPhrase
Entry
Using the Operator Panel Menus and Keypad
Epson AcuLaser CX17 Series
Specify the transmit key from WEP
Key 1, WEP Key 2, WEP Key 3, and
WEP Key 4.
Specify the transmit key from WEP
Key 1, WEP Key 2, WEP Key 3, and
WEP Key 4.
Specify the pass phrase of
alphanumeric characters from 8 to 63
only when WPA-PSK-TKIP is selected
for Encryption Type.
Specify the pass phrase of
alphanumeric characters from 8 to 63
only when WPA-PSK-AES is selected
for Encryption Type.
Specify the pass phrase of
alphanumeric characters from 8 to 63
only when WPA2-PSK-AES is selected
for Encryption Type.
User's Guide
254