10BASE-T Full
100BASE-TX Half
100BASE-TX Full
Note:
This item is displayed only when the printer is connected with a wired network.
Status (Epson AcuLaser CX17WF Only)
Purpose:
To display the information on the wireless signal strength. No changes can be made on the operator
panel to improve the status of the wireless connection.
Values:
Good
Acceptable
Low
No Reception
Note:
This item is displayed only when the printer is connected with a wireless network.
Wireless Setup (Epson AcuLaser CX17WF Only)
Purpose:
To configure the wireless network interface.
Uses 10base-T full-duplex.
Uses 100base-TX half-duplex.
Uses 100base-TX full-duplex.
Indicates good signal strength.
Indicates marginal signal strength.
Indicates insufficient signal strength.
Indicates that no signal is received.
Using the Operator Panel Menus and Keypad
Epson AcuLaser CX17 Series
User's Guide
253