Epson AcuLaser CX17 Series User Manual page 342

Error Code What You Can Do
016-766 Press the
available. If this does not solve the problem, contact SMTP server administrator.
016-767 Press the
016-791 Insert the USB memory device and press the
016-795 Press the
the supported one.
016-797 Press the
016-920 Press the
016-930 Remove the device from the front USB port and press the
016-931
016-981 Press the
016-985 Attached file size is larger than you defined. Press the
❏
Enlarge Max E-Mail Size.
❏
Lower the resolution setting.
❏
Change the file format of the scanned image.
017-970 Memory is likely to be full. Press the
❏
Delete the data stored in the memory.
❏
Lower the resolution setting.
❏
Reduce the number of pages.
017-980 Press the
017-981
017-988 Press the
computer does not have any problem.
018-338 Turn off the printer, and then on. If this does not solve the problem, contact the Epson local
representative office or an authorised dealer.
See Also:
"Contacting Epson Support" on page 377
024-340 Turn off the printer, and then on. If this does not solve the problem, contact the Epson local
representative office or an authorised dealer.
024-360
See Also:
"Contacting Epson Support" on page 377
024-371
button to clear the message. Ping the IP address of the SMTP server and check if the server is
button to clear the message. Check if the recipient address is correct, and try scanning again.
button to clear the message. Check if the file format of the data in the USB memory device is
button to clear the message. Check if the selected file in the USB memory device is valid.
button to clear the message. Check the wireless setting for the access point and the printer.
button to cancel the current job. Try copying fewer documents.
button to clear the message. Try the following:
button to clear the message. Retry when the printer does not process any job.
button to clear the message. Check if the interface cable is securely connected or your
Epson AcuLaser CX17 Series
button to clear the message.
button to clear the message.
button to clear the message. Try the following:
User's Guide
Troubleshooting 342