Bead-Carry-Out (Bco); Auger Mark - Epson AcuLaser M1400 Series User Manual

Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.

Bead-Carry-Out (BCO)

Problem
Bead-Carry-Out (BCO) is happening.
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.

Auger Mark

Action
If the printer is installed in a high altitude location, set the altitude of the location.
1. Launch the Printer Setting Utility, and click Adjust Altitude on the Printer
Maintenance tab.
2. Select the value close to the altitude of the location where the printer is installed.
3. Click Apply New Settings button.
Epson AcuLaser M1400 Series
Troubleshooting
User's Guide
76