User Wires And Pneumatic Tubes - Epson LS20-B Series Manual

3.7 User Wires and Pneumatic Tubes

■ Only authorized or certified personnel should be allowed to perform wiring.
Wiring by unauthorized or uncertified personnel may result in bodily injury and/or
malfunction of the robot system.
CAUTION
User electrical wires and pneumatic tubes are contained in the cable unit.
Electrical Wires
Rated Voltage
■ Do not apply the current more than 1A to the manipulator.
WARNING
15 pin
9 pin
Pins with the same number, indicated on the connectors on both ends of the cables, are
connected.
LS20-B Rev.4
Allowable Current
AC/DC30V
Suitable
Connector
Clamp Hood
Suitable
Connector
Clamp Hood
Setup & Operation 3. Environments and Installation
Wires Nominal Sectional Area
15
1A
9
Mfr.
DA-15PF-N
DA-C8-J10-F2-1R (Connector setscrew : #4-40 NC)
JAE
DE-9PF-N
DE-C8-J9-F2-1R
Note
Twist pair
0.211 mm
2
Unshielded
Standard
(Solder type)
(Solder type)
(Connector setscrew : #4-40 NC)
31