Epson LS20-B Series Manual page 91

(16) Remove the nut of the rotary fitting.
(17) Remove the rotary fitting from the metal duct.
LS20-B Rev.4
Remove the rotary fitting from the Duct Plate.
Disconnect the cables from the Duct Plate.
The rotary fitting is directly screwed in the metal duct. Loosen the screws to remove
the fitting.
Cut off the wire tie fixing the cables, and then disconnect the cables from the metal
duct.
Metal duct
Rotary fitting
Wire tie
Maintenance 4. Cable
Rotary Fittings
Nut
Duct Plate
2-M4×10
Wire tie
79