What is the TruVu™ ChillerVu™ Plant Controller?
The TV-PSM has 4 physical ports for BACnet or Modbus communication:
Port
Port type
Gig-E
10/100/1000 Mbps Ethernet
S1
High-speed EIA-485 port
S2
Electrically isolated EIA-485 port
Service
10/100 Mbps Ethernet
Port
HTTP/IP
NOTE The TV-PSM does not support CCN networks.
The TV-PSM also has the following ports:
•
I/O Bus port for wired TruVu
•
I/O bus edge connector for directly-connected TruVu
•
Xnet port for MPC Open XPIO expanders
•
Rnet port for ZS sensors, Wireless Adapter for wireless sensors, and an Equipment Touch
•
USB port for recovery
•
Ethernet Service Port for connecting locally to controller setup pages and the TruVu™ ET Display
Critical Product Announcement
Due to the global semiconductor supply chain uncertainty, the TV-PSM does not yet support communication over
the ARCNET network. References to ARCNET in this document are for future use and should be ignored at this
time.
The TV-PSM's driver properties and controller setup pages only show available communication selection options.
TruVu™ ChillerVu™ Plant Controller
Installation and Start-up Guide
For routing this type
of communication...
BACnet/IP,
BACnet/Ethernet, and/or
Modbus TCP/IP
BACnet/ARCNET
or
BACnet/MSTP
or
Modbus Serial
BACnet/MSTP
or
Modbus Serial
BACnet/IP Service Port
TM
MPC I/O expanders
TM
2
At...
10, 100, or 1000 Mbps
(1 Gbps)
156 kbps
9.6 to 115.2 kbps
9.6 to 115.2 kbps
9.6 to 115.2 Kbps
9.6 to 115.2 kbps
10 or 100 Mbps
MPC I/O expanders
©2022 Carrier.
All rights reserved.