Addressing the TV-PSM
To set up BACnet Broadcast Management Devices (BBMDs)
If your system has multiple routers that reside on different IP subnets, you must set up one router on each IP
subnet as a BACnet/IP Broadcast Management Device (BBMD).
Every subnet with a router must have a BBMD configured in order for broadcasts from routers on that subnet to
reach the rest of the routers on the network.
NOTES
•
The i-Vu® Standard or Plus application - If the i-Vu® web server is on a separate subnet than the rest of the
routers, the internal router must be assigned a routable IP address and configured as a BBMD.
•
The i-Vu® Pro application - If the i-Vu® Pro server is on a separate subnet than the rest of the routers, you
must register it as a foreign device to a router acting as a BBMD device.
Use the BBMD Configuration Tool to:
•
Write/read the Broadcast Distribution Table (BDT) of each BBMD device
•
Allow controllers on one subnet to communicate with controllers on other subnets
•
Enable the i-Vu® application to see, upload, or configure controllers on different subnets
TruVu™ ChillerVu™ Plant Controller
Installation and Start-up Guide
22
©2022 Carrier.
All rights reserved.