To Communicate Through The Bacnet/Ip Service Port Network - Carrier TruVu ChillerVu Installation And Startup Manual

To communicate through the BACnet/IP Service Port network

You can connect to the Service Port to access your network through:
•
Field Assistant
•
The Carrier touchscreen device
Connect an Ethernet cable from a computer to the controller as shown below.
1
Turn off the computer's Wi-Fi if it is on.
2
Launch Field Assistant.
3
Select a System Name.
4
If you need to create a new System Name, click
5
The System Name cannot:
Begin with a number.
○
Contain special characters other than a dash or an underscore.
○
Exceed 40 characters.
○
Contain capital letters or spaces. Use an underscore or dash between words.
○
Under Communications, select BACnet/IP Service Port.
6
Click to start your system. This opens a new browser window.
7
On the Devices page > Manage tab, click Find Devices to discover your routers.
8
Once routers are found, select one router at a time in the left-hand navigation tree and click Upload. Use
9
Ctrl+click, Shift+click, or both to select multiple items.
TruVu™ ChillerVu™ Plant Controller
Installation and Start-up Guide
To communicate through the BACnet/IP Service Port network
. Enter the System Name, then click Create.
29
©2022 Carrier.
All rights reserved.