To set up the controller through the Service Port
Ports tab
IP Port
IP Addressing
Ethernet Port
Address
Port S1
End of Network
Active Protocol
Port S2
End of Network
Protocol
Active Protocol
TruVu™ ChillerVu™ Plant Controller
Installation and Start-up Guide
Select the type of addressing the controller is to use. See Addressing the TV-PSM
(page 16).
A factory assigned Ethernet MAC Address for the Gig-E port.
Indicates status of the controller's End of Net? switch.
Indicates status of the controller's Port S1 Configuration rotary switch.
0=Disabled
1=MS/TP
2=ARCNET
3=Modbus
Indicates status of the controller's End of Net? switch.
Change active protocol, if needed.
Indicates if Port S2 is enabled for Modbus.
44
©2022 Carrier.
All rights reserved.