Bay Networks 5393 Hardware Installation Manual page 79

Table 3-1. ROM Monitor Commands (continued)
Command
config
erase
help
image [-d | <file>]
lat_key [-d]
net
option_key [-d]
ping
ports [-d]
sequence [-d |
<list>]
stats
Remote Annex 5393/PRI Hardware Installation Guide
Chapter 3
Description
Displays the current
hardware
configuration and
revision levels.
Erases non-volatile
memory.
Displays the list of
ROM Monitor
commands.
Displays and/or sets
the load image and tftp
load dump names.
Sets the LAT key.
Executes an Ethernet
transceiver loopback
test.
Sets or displays the
option key.
Sends ICMP
ECHO_REQUEST
datagram to a host or
gateway.
Shows the current
status of all ports.
Displays and edits the
load/dump interface
list.
Displays current
network statistics
gathered by the ROM.
ROM Monitor Commands
Use
Identifying your
hardware, memory, and
ROM versions.
Loading a new image
and need to erase the
old image.
Referencing the ROM
monitor commands.
Loading an image that
differs from the default.
Connecting to a DEC
VMS host.
Checking your Ethernet
connection.
Checking your option
key or setting.
Checking to see if a host
or gateway can be
reached.
Checking a port.
Checking or changing
the load/dump
interface list.
Checking the network
resources.
3-3