Led Indicators - Bay Networks 5393 Hardware Installation Manual

The Remote Annex performs a series of self-test diagnostics
each time it is reset or powered up. These tests take about 3
minutes to complete and cannot be deactivated. While these
tests are running, the annunciator remains amber. The
annunciator changes to green upon successful test completion.
For information about possible error conditions, see Chapter 4.

LED Indicators

When the Remote Annex is operating correctly, the front-panel LEDs
(see Figure 2-5) should appear as follows:
Annunciator: The annunciator should be green. If the
annunciator remains amber after completing the self-tests,
refer to Chapter 4 .
Segment Connection LEDs: A steady green indicates which
Ethernet LAN segment the module is using.
Module Status LEDs:
Init: Turns green when the Remote Annex begins the
initialization process after a power-up or reset. Typically,
this is the first LED that lights after power-up. The Init
LED turns off after the initial diagnostics have
successfully completed.
Unit: Turns green after the Remote Annex passes the
power-up diagnostics. If the Unit LED turns amber, refer
to Chapter 4 .
Net: Turns green after the Remote Annex verifies that a
valid Ethernet connection exists.
Remote Annex 5393/PRI Hardware Installation Guide
Chapter 2 Installing the Remote Annex 5393/PRI
2-11