Lat_Key - Bay Networks 5393 Hardware Installation Manual

lat_key

The lat_key command allows you to set the LAT key from the ROM
monitor.
The lat_key is optional and may be purchased separately.
The command syntax is:
lat_key [–d]
The lat_key command display looks like this:
monitor:: lat_key
Enter LAT KEY [<uninitialized>]::
The lat_key –d command displays the current LAT key setting:
monitor:: lat_key –d
Enter LAT KEY [<uninitialized>]::
Remote Annex 5393/PRI Hardware Installation Guide
Chapter 3 ROM Monitor Commands
3-17