Sequence - Bay Networks 5393 Hardware Installation Manual

Chapter 3 ROM Monitor Commands
3-22 Remote Annex 5393/PRI Hardware Installation Guide

sequence

The sequence command edits the load/dump interface list. This list
determines the order of the network interfaces the Remote Annex will
use for loading and dumping. The default, net, uses the LAN
interface. If the Remote Annex fails to boot using the first interface, it
will try the next interface. The command syntax is:
sequence [–d] | [interface[,interface]. . .]
Specify the LAN interface by selecting net. Separate each interface
with a comma or a space. Enter the interface list as an argument to
the command, otherwise the service port terminal displays a list of
available interfaces and prompts for a new list.
In the following example, interfaces are assigned to the load/dump
sequence list.
monitor:: sequence
Enter a list of 1 to 4 interfaces to attempt to use for
downloading code or upline dumping. Enter them in the order
they should be tried, separated by commas or spaces.
Possible interfaces are:
Ethernet:
SELF:
Enter interface sequence [net]:: self, net
Interface sequence: self,net
The SELF option appears only if the self-boot image is loaded.
net
self