Invoking The Console Monitor - Bay Networks 5393 Hardware Installation Manual

Invoking the Console Monitor

After the image boots, you can invoke the Console Monitor by
pressing on the service port terminal. The following prompt
Return
appears:
Console monitor:
At the Console Monitor prompt, entering help or ? displays the
available options:
dump (from the Annex to the host and reboots).
help or ? (displays the available options).
info (displays configuration information for the Annex).
leds (displays the current front panel LED status).
reboot filename (reboots the Annex).
rom (returns the Annex to the ROM Monitor).
syslog (displays syslog messages).
Remote Annex 5393/PRI Hardware Installation Guide
Chapter 2 Installing the Remote Annex 5393/PRI
2-33