Related Manuals for Bay Networks 3395A
Summary of Contents for Bay Networks 3395A
- Page 1 Release Notes for the Model 3395A Terminal Server Software Version 5.3 Bay Networks, Inc. Corporate Headquarters 4401 Great America Parkway Santa Clara, CA 95054 January 1995 *896-066-B* 8 Federal Street Billerica, MA 01821...
- Page 2 © 1995 by Bay Networks, Inc. All rights reserved. Trademarks SynOptics and SynOptics Communications are registered trademarks of Bay Networks, Inc. Bay Networks, LattisNet, and Lattis System 3000 are trademarks of Bay Networks, Inc. Other brand and product names are registered trademarks or trademarks of their respective holders. Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, Bay Networks, Inc.
-
Page 3: New Features
NOTE: V5.3 requires multimegabyte memory capacity. Memory for the Model 3395 Terminal Server cannot be expanded. Be sure that you have a Model 3395A Terminal Server with at least one set of expansion SIMMs to support the multimegabyte image. Memory expansion for the Model 3395A server is available by ordering the Model 773 SIMM Memory Option Kit. - Page 4 Release Notes for the Model 3395A Terminal Server Software Version 5.3 With V5.3 software, an access server can provide transparent access to IPX services, devices, or networks. Specific applications include: • Connecting a remote (dial-in) workstation or PC to the network.
- Page 5 IPX is a keyed software feature and requires a password to be enabled on the access server. Contact your Bay Networks sales representative or distributor for more information about obtaining a password and the documentation, which describes how to configure this feature on the Model 3395A server. 896-066-B VAX/VMS...
- Page 6 The access server can communicate with any RFC 1552-compliant IPXCP (IPX over PPP) client software implementation. A version of the Stampede Remote Office client software is qualified for use with Model 3395A servers. Contact your sales representative or distributor for more information.
-
Page 7: Automatic Protocol Detection
Kerberos and SecurID authentication. • Product support The IPX feature is supported on Model 3395A servers that have six or more wires and can run the TS3395m.img multimegabyte load image. Automatic Protocol Detection Access server ports can be configured to accept connections made via different protocols, using Automatic Protocol Detection (APD). - Page 8 Release Notes for the Model 3395A Terminal Server Software Version 5.3 The software can be configured to filter IPX traffic, based on the following criteria: • Source or destination address or network (IPX network number and node number) • IPX packet type The multiprotocol software also permits you to configure the software to limit...
- Page 9 The Model 3395A server software kit provides CCL scripts for selected modem types that have been tested with Model 3395A servers. Model 3395A servers also supply CCL scripts that have been modified to take advantage of the following features: •...
-
Page 10: Notes And Restrictions
The ifconfig command displays and modifies information about Internet characteristics, and the netstat command displays information about protocol sessions. Software kit changes The following changes have been made to the Model 3395A server software kits: • UNIX PC diskette now available A UNIX-format floppy diskette containing the host.tar, ccl.tar, and... - Page 11 V.42 LAM-M error correction or V.42bis compression for connections that are made using particular protocols (excluding ARAP), you must use CCL scripts which permit this feature to be negotiated. Refer to Chapter 8 of Configuring the Model 3395A Access Serving Features for more information. 896-066-B lists vendors that currently support flash cards for the Model 3395A...
- Page 12 1 second) disconnected the session. This problem affected units running ts3395m.img with ARAP and APD enabled. • Disabling PPP lists the known problems in the Model 3395A server V5.3 software and Known problems with V5.3 software Comments/workaround Be aware that "OPEN" indicates that PAP is not enabled at a port which has PPP enabled.
-
Page 13: Documentation Overview
One of the following documents is supplied with your V5.3 software: • LattisNet Model 3395 Software Installation Guide, UNIX/DOS, which describes procedures that you use to install Model 3395A server software on UNIX hosts. This guide is only supplied with UNIX software kits (Bay Networks part number 893-184-B). - Page 14 Release Notes for the Model 3395A Terminal Server Software Version 5.3 • LattisNet Model 3395 Software Installation Guide, VMS, which describes procedures that you use to install Model 3395A server software on VAX/ VMS hosts. This guide is only supplied with VMS software kits (Bay Networks part number 893-163-B).
- Page 15 The SHOW SERVER ALTERNATE STATUS display lists the amount of memory on the terminal server in the Installed Memory field. A Model 3395A server can obtain a load image from the network, or locally, from a memory card. The next sections explain the procedures you use in each of these cases.
Need help?
Do you have a question about the 3395A and is the answer not in the manual?
Questions and answers