Appendix C
Modem Upgrade Instructions
C-6
Remote Annex 5393/PRI Hardware Installation Guide
The following instructions detail how to remove a quad modem card
and toggle its appropriate DIP switch section (on DIP switch S1) to
assure that all remaining modem cards will be recognized by the
Remote Annex.
Figure C-3
1
Locate the quad modem card that you want to remove.
2
Starting at one corner of the card, push in the locking detent on the
nylon standoff, and gently work the corner of the card off the nylon
standoff (see
Figure
3
Repeat the procedure for the other three corners of the quad
modem card.
Modem Card
Removal
Figure C-3. Removing Modem Cards from the Modem Module
and
Figure C-4
illustrate the instructions. .
C-3).