Option_Key - Bay Networks 5393 Hardware Installation Manual

option_key

The option_key command loads an option key from the ROM
monitor. The command syntax is:
option_key [–d]
The option_key command display looks like this:
monitor:: option_key
Enter option_key [<uninitialized>]::
This command is case sensitive. When entering the option key, pay
close attention to character case.
The option_key –d command displays the current settings:
monitor:: option_key –d
option_key: <uninitialized>
Remote Annex 5393/PRI Hardware Installation Guide
Chapter 3 ROM Monitor Commands
3-19