Table of Contents
Advertisement
44 CONFIGURATION
If you are connected to the Secure Router 3120 with a modem, verify that
the modem is configured correctly. See
information about modem configuration parameters.
The following figure shows the login sequence and related prompts.
Initial CLI Prompt
Command Tips
•
•
•
•
•
•
•
Configuration Tips
The following tips will help you avoid some common configuration-related
problems.
Copyright © 2005-2007, Nortel Networks
.
Note: For Telnet access, after three failed login attempts, the Telnet
session terminates. You must reconnect to attempt another login. If
you are accessing the Secure Router 3120 using the console port,
there are no limits.
Note: The default host name is Nortel-model number, e.g., SR3120>.
Use the following command tips and shortcuts with command line
interface commands.
To display all commands from the current menu level down, type tree .
To access help associated with a command, type help <command
name>. You may also use the ? key after any command.
To exit back one level in the command hierarchy, type exit and press
Return.
To exit the command mode and/or return to the base CLI prompt, press
the key combination Ctrl-Z.
Type the first two letters of a command, and then press the Tab key to
automatically spell out the command.
Scroll through the available commands using the Tab key.
Secure Router 3120
Installation Guide
NN47260-300 02.01 Standard
9.2 10 January 2007
"Remote Access" (page 36)
Nortel Networks Confidential
for
Advertisement
Table of Contents
