Command Line Interface; Federal Information Processing Standard (Fips) - Nortel Contivity 1100 Configuration Manual

28 Chapter 1 Overview
The Nortel VPN Router Stateful Firewall License key must be installed to enable
the Nortel VPN Router Stateful firewall.
Tunnel keys are specific to the Nortel VPN Router hardware model that you are
using. Nortel VPN Router switches are manufactured to allow either access to the
maximum number of tunnels (VPN bundle) or support for 5 tunnels (Base Unit).
This feature offers reduced cost for users who want fewer tunnels. The existing
VPN bundle does not add a cost increase nor a need for a tunnel license key.

Command line interface

The command line interface allows you to make configuration changes to the
Nortel VPN Router via Telnet. You can access the command line interface by
initiating a Telnet session to the Nortel VPN Router management IP address. For
further information, see Nortel VPN Router Using the Command Line Interface .

Federal Information Processing Standard (FIPS)

You must separately order, purchase, and implement a FIPS kit to be FIPS
compliant. This kit contains detailed documentation concerning setting up,
operating, and configuring the Nortel VPN Router to be FIPS compliant. The
FIPS kit also includes tamper-resistant labels to be put on the hardware as
instructed in the FIPS kit documentation.
NN46110-500
Note: It is only necessary to install a key once on each Nortel VPN
Router. To enter the license key, go to the Admin > Install screen. You
must reboot the Nortel VPN Router to gain access to the new tunnel
limit.