Trigger; Language - Barco F70 Series User Manual
Hide thumbs
Also See for F70 Series:
- Service manual (168 pages) ,
- User manual (136 pages) ,
- Installation manual (22 pages)
Table of Contents
Advertisement
2.
Choose the desired DMX mode.
3.
Choose the desired starting channel.
4.
Choose whether or not you want the Auto power-down feature to be enabled. If enabled, determine the
time-out.
5.
If required, enable Art-Net. If enabled, determine the desired Art-Net Universe and Art-Net channel.
10.5 Trigger
About
There are 3 trigger outputs (2 on the F40 series) on the projector; one in the front and two on the back panel.
These outputs can be used for controlling external equipment.
The trigger outputs can be individually set to active low or active high by entering the menu Settings /
Communication / Triggers
Image 10–11 F40 series trigger menu
The time of trigger output is defined via an API code. Contact Barco support for detailed info.
10.6 Language
Setting the menu language
The menu language can be changed to a suitable language.
Enter the menu Settings / User Interface / Language
Use the arrow keys on the remote to select a language.
System settings menu
601–426 /15
F70 Series
153
Advertisement
Table of Contents
