Trigger Output - Barco ELM R12 Owner's Manual

Connections
Connecting a VS05 to the projector
The VS05 can switch up to 5 Composite Video sources, 3 Super Video sources and 1 RGB analog or component video source to
the projector. In addition, the audio signal proper to the source, can be switched to an audio amplifier.
Order number : R9827890
For more information about the use of the VS05, consult the VS05 owner's manual.
Connecting an IR Remote Receiver to the projector.
This infrared receiver unit makes it possible to control the projector from another room.
There is a communication line cable between the IR receiver and the projector or the RCVDS. The control information from the RCU
can now be sent to the IR Remote Receiver.
The IR Remote Receiver displays the selected source on a 7-segment display.

Trigger output

5 V output voltage to trigger an external device (max. 10 mA).
This voltage is available when the projector is on.
4-16
Downloaded from ProjectorsManual.com Manuals
5976072 BARCOELM R12 05052000