Displayport 2 (IR)
Image A–2
This is the default setup, and the properties of the input is as follows:
image.connector.displayport1.colorcomponent.red
image.connector.displayport1.colorcomponent.green
image.connector.displayport1.colorcomponent.blue
image.connector.displayport2.colorcomponent.red
image.connector.displayport2.colorcomponent.green
image.connector.displayport2.colorcomponent.blue
A.4 Cloned image with full RGB input
Cloned image with full RGB input
In this setup the image is rendered for visible light. It has full RGB information. In this setup there is also
requested to take the red color component on the input for the IR channel and fully saturate the DMD with this
component.
Display port 1 (VL)
Image A–3
Displayport 2 (IR)
Image A–4
To achieve this result, use the following settings:
Property
Color mapping
Color component mapping
Value
RED_IN
GREEN_IN
BLUE_IN
RED_IN
GREEN_IN
BLUE_IN
DMD
601–426 /15
F70 Series
185