Cloned Inputs With Only Green Content For Ir - Barco F70 Series User Manual

Color component mapping
image.connector.displayport1.colorcomponent.red
image.connector.displayport1.colorcomponent.green
image.connector.displayport1.colorcomponent.blue
image.connector.displayport2.colorcomponent.red
image.connector.displayport2.colorcomponent.green
image.connector.displayport2.colorcomponent.blue
A.5 Cloned inputs with only green content for IR

Cloned inputs with only green content for IR

In this setup, the input is a fully saturated green and white image, well suited for the IR channel. In this setup, a
portion of the green image is extracted and applied to the red channel for visible light also. Note that the power
of the visible light source must be dimmed to achieve the desired effect.
Display port 1 (VL)
Image A–5
Display port 2 (IR)
Image A–6
image.connector.displayport1.colorcomponent.red
image.connector.displayport1.colorcomponent.green
image.connector.displayport1.colorcomponent.blue
image.connector.displayport2.colorcomponent.red
image.connector.displayport2.colorcomponent.green
image.connector.displayport2.colorcomponent.blue
186 601–426 /15 F70 Series
Property
Color mapping
Property
Value
RED_IN
GREEN_IN
BLUE_IN
RED_IN
RED_IN
RED_IN
DMD
Value
GREEN_IN
OFF
OFF
GREEN_IN
GREEN_IN
GREEN_IN