Getting to know the projector.
The Standby key is equipped with white, blue and red backlight depending on the status of the projector. See
table in
"Power on / Standby button backlight indications", page 25
1
Image 2–7
Item
Name
No.
1
LCD Display
2
Navigation keys
3
Menu button
4
Power button
5
Back
6
OSD ON/OFF
7
Input
8
Shutter
9
Test Patterns
10
Lens
2.7 Shortcut buttons
About the keypad shortcut buttons
On the keypad, there are three shortcut buttons; for lens function, test pattern selection, and input selection.
See
"Local keypad", page 29
remote control has only the test pattern shortcut button).
When the test pattern or input shortcut button is pressed, a pop up menu will show up on the LCD screen.
Make a selection by the arrow keys, and confirm.
30
601–426 /15
F70 Series
2
Description
Shows navigation menu incl. sub menus and projector status screens
(dashboard, notification, about and preview).
Navigation arrows (up, down, left, right), confirm selection (✓)
Toggle between OSD / Information menu.
Power on / standby / ready
Back to previous screen.
Deactivate the On Screen Display (OSD). Only critical warnings will be
displayed.
Shortcut to input source menu on LCD. Use navigation keys to select and
enable input.
Enable and disable the lens shutter function. This is not a mechanical shutter,
but it toggles the light source on and off. Backlight is red when the shutter are
enabled.
Shortcut to test pattern menu on LCD. Use navigation keys to select the desired
pattern.
Shortcut to lens function. A test pattern displays on the OSD. LCD screen
displays the navigation keys to manage and confirm actions.
and
"Platinum remote control unit", page
for info regarding this.
3
10
9
8
32for location and description. (The
4
5
6
7