Barco F70 Series User Manual page 87

For Images to be displayed in this mode, the resolution must be the same on both channels
Signal source setup.
When using dual inputs, it is important that the signal sources are set up correctly, with the correct resolution.
Please refer to the manual for the source itself (PC, Graphic driver card..) in order to obtain a correct setup. If
the setup is wrong, no picture will be visible in dual mode.
The resolution for each dual column channel can be up to 1920x2400 pixels.
The resolution for each dual sequential channel can be up to 2560x1600 pixels. (4K)
Change the EDID for each channel to the correct value. See chapter "Connector Settings" for EDID
setup.
3840
1920
2400
Dual Column Input1
Image 6–8 Dual Column Setup
1920
2400
Dual Column Input 2
Dual Sequential Input1
2560
1600
2560
Image 6–9
601–426 /15
Source menu
1600
Dual Sequential Input 2
F70 Series 87