Installation menu
How to enable IR/Night Vision.
Enter the Menu/ Installation / Illumination menu. This menu shows two sliders; one for the LED Desired power
(daylight), and one for the IR LED Desired power (Night Vision). The sliders are scaled from zero – 100%
power.
Image 8–1
Select the Desired power slider, and move the slider to the left by the arrow keys to nearly 0% to reduce the
light intensity. (Daylight visibility). By this, the IR LED will be dominant, and the image on the screen will be
visible with the Night Vision Goggles. Put on the goggles, and adjust the IR LED slider to obtain an optimal
night vision rendering.
By mixing the intensity (power) of both the Desired power and the IR LED, it is also possible to simulate other
visibility scenarios, such as evening / early night vision.
Image 8–2
8.8 IG pixel shift
About
All sub-menus, except from the IG Pixel shift, are described in other topics in this manual, where they more
naturally belong.
8.8.1 IG pixel shift
General
IG pixelshift is a feature where the Image Generator can process the image in two channels.
This two input channels have different positions of the pixelshift module. Channel 1 is displayed with module
position 1, and channel 2 is displayed with position 2. The result is a 4K rendering of the displayed image.
Max frequency pr channel is 60 Hz.
Only DVI or Displayport inputs on the projector can be used for this purpose.
601–426 /15
F70 Series
137