Connector Selection; Connector Settings - Barco F70 Series User Manual

Source menu

6.1 Connector selection

About
Home/Source
Image 6–2
Observe that the HDCP compatibility for each input is noted in the input icon. See chapter 5.1
"Projector source and control connectors". for input source specifications.
Click on the relevant input connector icon to swap or activate the source.
The icon for the active source is highlighted.
The list of displayed sources can be adjusted to include other connectors.
The default selection of connectors displayed is:
• HDMI
• Display Port 1
• Display Port 2
• Dual Display port Columns
• Dual Display port Sequential
• HDBaseT
• DVI 1
• DVI 2
• Dual DVI Columns
• Dual DVI Sequential
•

Connector settings

6.2 Connector settings
About connector settings
The Connector Settings menu allows you to change settings for each input connector of the projector.
By default all options for every connector are set to automatic, together with the native Extended Display
Identification Data (EDID).
When entering the menu for each input connector, you can change the following:
• Color Space
• Signal Range
• EDID
84 601–426 /15 F70 Series