Barco F70 Series User Manual page 124

Installation menu
Functional description
Every projector in a multi–projector setup will have a different latency. This latency depends on the amount of
warp and on the frequency of the projected image. In order to have no visible difference in the overall
projected image, the user needs to be able to control the latency of each projector.
The latency value can be read out in the status menu for each individual projector.
How to configure transport delay?
1. Read out and note the latency of each projector in the multi-projector setup. You can find this latency
under Transport delay in the status menu for each projector.
Image 8–26 Example of the Transport delay in the status menu
2. Identify the projector with the longest delay.
3. For each projector in the setup, select Installation → Warp in the main menu.
Image 8–27 Installation menu, Warp
4. In the Warp menu, select Transport Delay.
Image 8–28 Warp menu, Transport delay
The Transport delay menu is displayed.
124 601–426 /15 F70 Series