Getting to know the projector.
Which protocol to use
•
The NEC protocol have to be used for Barco projectors based on the Pulse platform: Loki, Balder, F40.
F70, F80, F90, HDX 4K, UDX, UDM and more..
•
The RC5 protocol have to be use all other Barco projectors: HDX W, HDF W, HDQ 2K, ...
How to set
1.
Remove the cover. For more info on how to remove, see
2.
Place the switch in the NEC position.
Image 2–4
Remark with RC5 protocol
Not all buttons of the Pulse RCU are one-to-one compatible with the legacy Barco RCU. Button pairs
SHUTTER open/close and POWER on/off emit the same code (per pair) when in RC5 mode, because the
legacy RCU's only had 1 button for Shutter and 1 button for Standby.
34
601–426 /15
F70 Series
"Remote control, battery
installation",
page
32.