The DICOM function is used to simulate DICOM gammas at a few selected max light outputs, and assumes
that both ambient light and the projector black is 0 cd/m2.
How to select the optimal DICOM Gamma
1.
Enter the menu Image/Gamma
2.
Scroll horizontally in the menu and select a DICOM value that is closest to the value from the source. (If
the source is set up with a value of 270, select DICOM 250 from the drop down menu). Higher numeric
value represent a brighter environment.
Note: The Gamma slider in the Gamma menu will be disabled when DICOM, SIM or SRGB values
is selected.
Image 7–2
3.
Verify that the selected value gives a proper rendering of the image. If not, select another value.
7.7 Digital Zoom Shift
About
The digital zoom and Digital Shift functions are both entered from the same menu. The menu shows how to
toggle between zoom and shift adjustment.
Enter the menu shown below, either via the Remote control or the keypad.
The combined menu is showed below.
The symbols on the lower part of the menu are symbols showing how to operate the keypad / remote control
for the digital shift / digital zoom modes..
Image 7–1
Image menu
601–426 /15
F70 Series
95