If The Discharged Fluid Disposal Message Appears - Roland TrueVIS MG-640 User Manual

If the Discharged Fluid Disposal Message Ap-
pears
The message shown below appears when a certain amount of discharged fluid has collected in the bottle
and the sub power is turned on. If this message appears, dispose of the discharged fluid.
EMPTY
DRAIN BOTTLE
If you continue to use the drain bottle without discarding the discharged fluid even though the message
above has been displayed, the drain bottle will become full, and the message shown below will be dis-
played. No more discharged fluid can be stored in the drain bottle, so be sure to discard the discharged
fluid immediately. If this message appears during printing, printing is stopped.
LIMIT OVER EMPTY
DRAIN BOTTLE
IMPORTANT
When the message "LIMIT OVER EMPTY DRAIN BOTTLE" appears on the screen, be sure to discard the discharged fluid.
If you do not discard the discharged fluid, you will not be able to clear this message.
Procedure
1.
Remove the drain bottle and discard the discharged fluid.
IMPORTANT
When you remove the drain bottle, a few drops of discharged fluid may come out of the machine. Exercise
caution to prevent this fluid from soiling your hands or the floor.
WARNING
Never place discharged fluid or ink near an open flame.
Doing so may cause a fire.
CAUTION
To store discharged fluid temporarily, place it in the included drain bottle or in a durable
sealed container such as a metal can or polyethylene tank, and cap the container tightly.
Any spillage or vapor leakage may cause fire, odor, or physical distress.
252
Disposing of Discharged Fluid